Skip to content
Hand-picked at Bourgeois: 17 tonewood sets for your custom guitar
Hand-picked at Bourgeois: 17 tonewood sets for your custom guitar

Hand-picked at Bourgeois: 17 tonewood sets for your custom guitar

November 18, 2026

Every guitar starts with a special piece of wood. And with a custom Bourgeois, you get to choose exactly which one. Recently, our Fellows Coen and Mike selected 17 sets from the wood stock at Bourgeois Guitars in Lewiston, Maine: rare Brazilian rosewood, vividly coloured cocobolo, striped ebony, figured mahogany and three special tops. Each set is one of a kind and waiting to be built into a unique guitar, which could become your dream guitar.

Choose the exact wood for your guitar

When you order a custom guitar, you usually pick a wood species from a list. Here, you pick the actual piece of wood your guitar will be built from. What you see in the photos below is what the back and sides of your guitar will look like.

A few things that help you read the photos:

  • A set is the wood for one guitar: a back in two halves and two pieces for the sides. The two back halves are cut from the same board and opened like a book, so the grain mirrors at the centre seam.
  • Figure is the word for patterns in the wood beyond the normal grain, such as flames, curls and swirls. It's what makes every set look different.
  • The chalk outline shows roughly where the body will be cut from the back. It doesn't fix the model, though: every set in this article is suitable for a dreadnought or any smaller body shape.
  • The set code, for example 30 or F11, is how we keep track of each set. Mention it when you get in touch.
  • The tops are the soundboard, the front of the guitar. We selected three special ones, which you'll find at the end of this article.

More about tonewoods

Brazilian rosewood

For many acoustic players, Brazilian rosewood is the most sought-after tonewood there is. International trade in it has been strictly limited since 1992 to protect the species, so new sets are rare. Rosewood gives a guitar a warm, rich sound with lots of resonance and volume. Brazilian rosewood adds a clear, well-defined low end and trebles that ring almost like a bell. We found four sets, each one with the required CITES documentation.

Set 30

Deep brown with bright orange flames that mirror almost perfectly across the centre seam, especially in the lower half of the back. The sides carry the same warm brown with darker streaks.

Brazilian rosewood back and sides, set 30, for a Bourgeois custom guitar

Set F11

A chocolate-brown set with a rolling, wavy figure across the lower half of the back. Calm at first glance, with more movement the closer you look.

Brazilian rosewood back and sides, set F11, for a Bourgeois custom guitar

Set F12

The most figured of the four. Swirls and waves run across the full width of the back, from the waist down.

Brazilian rosewood back and sides, set F12, for a Bourgeois custom guitar

Set F13

Dark and straight-grained, with a pattern that forms arches down the middle of each half, like a row of church windows. A classic, understated look.

Brazilian rosewood back and sides, set F13, for a Bourgeois custom guitar

Madagascar rosewood

Madagascar rosewood is often compared to Brazilian rosewood, in looks as well as in sound. Characterised by deep lows and lots of high, it's described by many as a piano-like sound.

Set 09

Straight, even grain in a dark chocolate brown. A calm and timeless set that lets the shape and the details of your guitar speak.

Madagascar rosewood back and sides, set 09, for a Bourgeois custom guitar

Cocobolo

Cocobolo is a rosewood from Central America, known for its strong colours: orange, red and gold, with dark lines running through it. It is a very dense wood, and cocobolo guitars are known for a clear, bright and lively sound. The colours deepen as the wood ages.

Set 01

Classic cocobolo: orange and red with dark streaks, and a rippling curl in the lower half of the back. The sides are a darker red-brown.

Cocobolo back and sides, set 01, for a Bourgeois custom guitar

Close-up of the cocobolo back of set 01 for a Bourgeois custom guitar

Set F02

Golden orange with a swirling figure across the entire back. Of the three cocobolo sets, this is the one with the most movement.

Cocobolo back and sides, set F02, for a Bourgeois custom guitar

Set F03

Dark brown with golden flames. The light stripe down the centre is sapwood, the lighter outer layer of the tree. Here it forms a natural centre line on the back.

Cocobolo back and sides with sapwood centre stripe, set F03, for a Bourgeois custom guitar

Close-up of the cocobolo back of set F03 for a Bourgeois custom guitar

Ebony

Ebony is one of the densest and hardest woods used in guitar building. You probably know it from fretboards and bridges, but as back and sides it shows a very different face: bold black and brown stripes. In sound, ebony is a balance of rosewood and maple: a bright, crisp attack with a smooth sustain. We selected two sets of Mun ebony from Southeast Asia and one set of Macassar ebony from Indonesia.

Set 05: Mun ebony

Black stripes on a warm, rosy brown, running the full length of the back and sides. A bold, graphic look.

Mun ebony back and sides, set 05, for a Bourgeois custom guitar

Set 12: Mun ebony from Vietnam

Where set 05 runs in straight lines, set 12 swirls. Dark lines curve and loop across a rose-coloured background, and no two parts of the back look the same.

Mun ebony back and sides from Vietnam, set 12, for a Bourgeois custom guitar

Set F04: Macassar ebony

Dark brown and black stripes with a light sapwood stripe down the centre, which gives the back a clear dividing line.

Macassar ebony back and sides with sapwood centre stripe, set F04, for a Bourgeois custom guitar

Mahogany

Mahogany is one of the classic guitar woods, known for a warm, dry and woody sound with a strong midrange. It is lighter than rosewood and responds very directly to your playing. These three sets are anything but ordinary mahogany: each one has its own kind of figure.

Set 22: Beeswing mahogany

Beeswing is a rare figure made up of small, shimmering patches that look like the wings of an insect. Move your head while you look at it and the pattern moves with you.

Beeswing mahogany back and sides, set 22, for a Bourgeois custom guitar

Set 07: Cuban mahogany, grown in Hawaii

Cuban mahogany is the original mahogany that furniture makers prized centuries ago, and it is rarely available today. These trees grew in Hawaii. The set has a deep orange colour and a strong curl that runs across the whole back and the sides.

Hawaiian-grown Cuban mahogany back and sides, set 07, for a Bourgeois custom guitar

Close-up of the Cuban mahogany back of set 07 for a Bourgeois custom guitar

Set 08: Fiddleback mahogany

Fiddleback is a tight, rippling figure that runs across the width of the wood, the same figure you often see on the back of a violin. Here it covers the entire back, with darker streaks at the top.

Fiddleback mahogany back and sides, set 08, for a Bourgeois custom guitar

Three special tops

The top, or soundboard, is the front of the guitar and has a big influence on how it sounds. Alongside the back and sides, we selected three tops with a story. Each of them can be combined with any of the back and sides sets above.

Sets F14 and F15: Sinker redwood

Sinker redwood comes from old-growth redwood logs that sank to the bottom of Californian rivers during logging more than a century ago. Recovered from the riverbed, the wood has taken on grey and brown tones from the water and minerals. In sound, sinker redwood combines the warmth of cedar with the punch of spruce: a bold response with plenty of brilliance and warm overtones. F14 has bold dark and light stripes. F15 is lighter, in grey and tan.

Sinker redwood top F14 for a Bourgeois custom guitar

Sinker redwood top F15 for a Bourgeois custom guitar

Set 16: Axe-cut cypress (400 years old)

This top is sinker cypress: the tree was felled by hand with an axe, but the log sank to the bottom of a river on its way to the sawmill and lay there for decades before it was recovered. The top has a warm honey colour with darker grey tones towards the centre, and a fine, straight grain.

Axe-cut cypress top, set 16, for a Bourgeois custom guitar

How to order your custom Bourgeois

  1. Pick your set: note the set code, and a top code if one of the three above caught your eye.
  2. Get in touch with our Fellows: send us an e-mail and we'll reserve the set for you and discuss the options with you.
  3. Design your guitar together with us: body shape, neck, binding, inlays and much more. Take a look at the Bourgeois custom options to get an idea of everything that's possible. As an official Bourgeois dealer, we'll help you with every choice.
  4. Bourgeois builds your guitar in Lewiston, Maine. The estimated build time is between 6 and 8 months, depending on the specifications.
  5. We set it up to the TFOA Gold Standard. When your guitar arrives in Dedemsvaart, we give it the perfect setup before it goes to you.

Which set will be yours?

Every set in this article exists only once. If one of them catches your eye, don't wait too long. Whether you already know exactly what you want or are still exploring, our Fellows are happy to help. Feel free to send us an e-mail. No strings attached!

Start your Bourgeois custom order here

Localization