Overdrives: A Buyers Guide!

January 11, 2023 by
Davey van Essen
| No comments yet

We're in love with the overdrive! For most of the Fellows here, it's the first pedal we ever bought. To help you get through the wide variety of models available, here's a little buyers guide.

How do overdrives work?

Overdrive naturally occurs when you crank a tube amp. Due to the sheer volume of a cranked tube amp this wasn't accessible for everyone in the 60s (before pedals were invented), let alone today! So guitar players found a way around it by simply destroying the speakers of their amps. This resulted in some great sounds, for example: You Really Got Me by The Kinks. Dave Davies got this (in)famous tone by slashing his speaker with a razor blade. 

But let's get straight to the point(s): How does an overdrive pedal work? Diodes in the circuit make sure to 'clip' your signal, dividing overdrives into two main food groups based on the circuit. Soft clippers, and hard clippers. Ibanez TS808, the MXR Duke of Tone and the Nobels ODR1. At the hard-clipping side of the spectrum we have the coveted Klon Centaur over(priced)drive and the Boss Blues Driver.

Soft Clippers

The most popular of all overdrives are soft clippers, which have been around since the 1970's. Soft-clipping happens when your guitar signal extends beyond the clean headroom and reaches its ceiling. Here, the waveform is compressed providing a smooth type of gain. The most famous type of soft clipper, and overdrive in general, is the Ibanez Tubescreamer. 

Ibanez' Tubescreamer

The tubescreamer was designed by Ibanez in 1978. There are a lot of versions like the TS808TS9 and the TS10. 

The classic Tubescreamer sound is very mid focussed, which makes it ideal for cutting through a mix. It fattens up the sound of single coil guitars (like Strats) and makes your sound tighter and more aggressive. Because of this quality it was (and still is) very much loved by guitar players like John Mayer, Stevie Ray Vaughan, Mark Tremonti and many more!

Marshall's Bluesbreaker

The Bluesbreaker's circuit was technically based on a legendary amp: The Marshall Model 1962 Combo, aka the Bluesbreaker. It got this name because of Eric Clapton's use of the amp on the 'Beano' album by John Mayall and the Bluesbreakers.

In 1991 Marshall decided to make a Bluesbreaker pedal. Although it didn't exactly sound like the amp in question, it had its own sound. Unlike the Tubescreamer, The Bluesbreaker sound is very transparant and low in gain. Ideal for edge of breakup tones and boosting the gain of the amplifier without colouring the sound. Notable users of the Bluesbreaker circuit are: John Mayer, Chris Buck, Mick Ronson, Joey Landreth and fellow Dutchie Paul Davids! 

Hard Clippers

Hard-clipping overdrive pedals also extend your guitar signal beyond the clean headroom. But unlike a soft clipper, these will simply cut off the signal as it exceeds the headroom, which produces a more aggressive, edgier sound. Although they can be more harsh to the ear, many players find them more dynamic and get better mileage out of the guitar's volume knob. 

Pro Co RAT

Most distortion pedals can be filed under hard clippers and the Pro Co RAT is arguably on the most popular. In 1978, it was invented in Kalamazoo, MI. Scott Burnham and Steve Kiraly first had the idea after playing, repairing and modifying all the available distortion pedals on the market. They wanted a pedal that could go from overdrive to distortion and then all the way to fuzz.

Numerous variations of the original RAT pedal are still being produced today, but it's also inspired many builders to make pedals that are arguably just as good. Here at TFOA, we're big fans of JHS Packrat. The PackRat is the ultimate tribute to the 40+ years of rodent evolution and its impact on the guitar’s sound. Artists from every genre have used the iconic tones in this unassuming black box to create their sounds, including Nirvana, John Scofield, Pink Floyd, Metallica, REM, the Eagles, Jeff Beck and Radiohead. 


The Klon Centaur

The Klon circuit is a very controversial topic in the guitar world. It was first designed by Bill Finnegan in 1991 and at the time there weren’t a lot of boutique pedal builders, the then astronomical price tag of $395 wasn’t a big hit. Since then however, it's gained a lot of hype! So much so, that an original Klon centaur will set you back between $3000-$7000 on the used market nowadays. 

Although it's a hard clipper, it doesn’t sound as harsh as a distortion because it's blended with a clean boost circuit which has no clipping, meaning you can still hear your clean guitar signal. Because of this, the guitar retains its dynamics and “amp-like” sound.

If you (like most guitar players) don’t want to spend that absurd amount on a pedal there are a lot of Klones, these are way more affordable, well made and sound (almost...) just as nice! The Klon is a very rich and compressed drive, great if you want an amp-like distortion. It's also very versitile, it can be used as a boost and it stacks great with other overdrives and distortions.

"Amp in a Box" Drives

Amp in a box drives are pedals that are based on iconic amp circuits like the Marshall Plexi, Vox AC30 and Dumble Overdrive Special. They’re great for situations where you can't bring your own amp but still want a similar sounding gain stage. You can also use them to reshape your amp, for example: you can make a deluxe reverb sound like a cranked Marshall!  

Some examples of amp in a box style drives are:
Catalinbread Galileo (Vox AC30)
Victory V1 Sherrif (Victory Sheriff)
Vertex Steel String Supreme (Dumble Steel String Singer)
Jackon Audio Twin Twelve (Silvertone 1484)

There are a lot of versions of every drive circuit, some true to the original whilst others are modified. At the end of the day it it all comes down to personal preference, the best way of finding a new drive is to simply try them! Here at TFOA we have plenty of overdrives, be it vintage, modern or boutique. You can order them online but if you have the chance, stop by our shop! Coffee's on us. 

Sign in to leave a comment